telescopic extension spindles

HIGHLIGHTS

DATA SHEET

GATE VALVES TYPE/ SPINDLE SQUARE

PIPE COVER IN M

ROD LENGTH IN M

ARTICLE NUMBER

house connecting gate valves
(HAA)
with spindle square
12mm
0,75 - 1,000,46 - 0,73ETK0.24
1,00 - 1,500,71 - 1,22ETK0.31
1,15 - 1,800,86 - 1,52ETK0.33
1,60 - 2,701,31 - 2,42ETK0.36
network gate valves
DN 40/50
with spindle square
14mm
0,85 - 1,050,43 - 0,65ETK1.22
1,05 - 1,500,66 - 1,11ETK1.30
1,25 - 1,900,86 - 1,52ETK1.33
1,70 - 2,801,31 - 2,42ETK1.36
network gate valve
DN 65/80
with spindle square
17mm
0,85 - 1,100,43 - 0,65ETK2.22
1,10 - 1,550,66 - 1,11ETK2.30
1,20 - 1,800,78 - 1,35ETK2.32
1,75 - 2,851,31 - 2,42ETK2.36
network gate valve
DN 100/150
with spindle square
19mm
0,95 - 1,150,41 - 0,62ETK2.22
1,15 - 1,550,61 - 1,02ETK3,29
1,30 - 1,900,78 - 1,35ETK 3.36
1,85 - 2,951,31 - 2,42ETK 3.36
Network gate valve
DN 175/200
with spindle square
24mm
1,00 - 1,200,37 - 0,54ETK4.18
1,20 - 1,500,54 - 0,88ETK4.27
1,35 - 1,850,71 - 1,22ETK4.31
1,75 - 2,651,11 - 2,02ETK4.35

GATE VALVES TYPE/ SPINDLE SQUARE

PIPE COVER IN M

ROD LENGTH IN M

ARTICLE NUMBER

network gate valves
DN 250/350
with spindle square 27mm
27mm
1,10 - 1,250,34 - 0,48ETK5.15
1,25 - 1,500,49 - 0,77ETK5.25
1,40 - 1,850,66 - 1,11ETK5.30
1,85 - 2,751,11 - 2,02ETK5.35
network gate valves
DN 400/450
with spindle square 32mm
1,40 - 1,650,46 - 0,73ETK6.24
1,45 - 1,850,58 - 0,97ETK6.28
1,45 - 1,950,71 - 1,22ETK6.31
1,85 - 2,751,19 - 2,06ETK6.35
network gate valves
DN 500/600
with spindle square 36mm
1,60 - 1,850,47 - 0,73ETK7.22
1,75 - 2,000,68 - 0,96ETK7.30
1,60 - 2,100,67 - 1,14ETK7.30
2,00 - 2,700,88 - 1,56ETK7.33
network gate valves
DN 700/800
with spindle square 41mm
1,90 - 2,350,63 - 1,06ETK8.29
2,20 - 2,750,91 - 1,44ETK8.32
2,25 - 3,201,13 - 2,02ETK8.35
4,25 - 7,203,13 - 6,02ETK8.39

We would be pleased to send you an offer for your individual construction length.

MONTAGE

Required assembly tools
• Hammer for inserting the mounting pin
• Pin driver 5mm for possible loosening of the pin connection

 

Preparation
• Determine the required pipe cover (RD) and check the nominal diameter of the valve.
• Compare feasible boom length (GL) with installation situation
• If necessary, mount accessories on the gate valves

 

Attention
• Align EBG axially to valve stem, fill and compact
• Use a suitable filling material, preferably sand or gravel that can be compacted.
• Make sure there is sufficient clearance between the road cap and the operator’s square (170mm +50/-80).
• Ensure that the EBG is centered within the road cap.

 

Subject to technical changes without notice. Special shapes may result in deviations from these assembly instructions.

 

ASSEMBLY INSTRUCTIONS SHOW AND DOWNLOAD

Diese Webseite verwendet Cookies, um Ihnen den bestmöglichen Service zu gewährleisten. Wenn Sie auf der Seite weitersurfen stimmen Sie der Cookie-Nutzung zu. Weitere Informationen

Die Cookie-Einstellungen auf dieser Website sind auf "Cookies zulassen" eingestellt, um das beste Surferlebnis zu ermöglichen. Wenn du diese Website ohne Änderung der Cookie-Einstellungen verwendest oder auf "Akzeptieren" klickst, erklärst du sich damit einverstanden.

Schließen